ELMOD ThinkTank Tankmodul FUSION PRO Rev.F
Scope of Delivery
ready to use electronic board
power supply cables
two connecting plugs for drive motors
all necessary cables for the RC receiver
rotary knob for volume control and connecting cable for loudspeaker
Recommended accessories
IR battle extension (optionally for connecting with the Tamiya® Battle Unit or the ElMod® Battle Set)
connecting adapter for Tamiya® tank vehicles
Details
Drive:
two 10 A strong chain motor drivers (up to 30 A peak each motor), short circuit and overload protected.
optional connection of up to two external drivers for alternative motor types (for example brushless motors).
physics engine 2.0: a driving experience of commanding a heavy vehicle by simulation of mass inert.
all parameters of the physics engine may be adjusted by a PC or Notebook.
Steering
configurable steering with chains (may also be deactivated).
configurable spin turn (may also be deactivated).
steering of individually configurable axle by a servo with optional speed dependent steering lock angle.
Turret and weapon functions
HengLong® compatible turret connector.
optionally available adapter for a Tamiya® turret group.
full proportional turret rotation with a motor (max. 2 A).
full proportional elevation of the main gun with a motor (max. 2 A).
control of a shot/recoil motor (max. 2 A).
support for Tamiya® barrel recoil mechanics with independently configurable retraction and extraction speed.
simulation of the barrel recoil by a servo with independently configurable.
retraction and extraction speed and configurable steering lock angle.
connection for Taigen® Xenon flash and HengLong® LED muzzle flash.
MG muzzle flash may be connected directly by LED with configurable rate of fire.
Lighting and miscellaneous functions
one to four LEDs may be connected to all light channels.
no further wiring or additional resistors are necessary.
all light channels are short circuit protected. The LEDs can't be damaged by false polarity.
included color-coded cables with polarity reversal protection.
main light may be dimmed and switched on and off by the radio.
support for a smoke unit with smoke emission depending on engine load and motor sound.
Sound Generation
Support of all ElMod sample sets and the ElMod NextGen Sound Technology for particularly prototypical sound playing.
integrated sound unit plays several different sounds simultaneously.
Sound types:
various sound events: several motor start sounds with distinction between coldstart and warmstart, several engine off sounds. Engine sounds for the movement with simulated gear change, distinguishing between acceleration, cruising and braking. No audible steps between the engine sounds.
optional collateral driving noises such as chassis squeal and optional surrounding noises.
turret rotation sounds with optional distinction of operation with or without main engine support.
sound for elevation of the main gun.
shooting sound for MG.
fire of the main gun (single shot or full-automatic fire).
variable sounds for the projectile's impact with simulation of the impact in different distances.
up to eight sounds that can be freely triggered by the user, like a horn.
plain text announcement if battery voltage is too high/low.
sounds for the IR battle mode.
separate volume control of every sound type (for example the engine noise) and extensive configuration of the sound parameters.
adjustment of the entire volume by the provided rotary knob.
all sample sets are provided on a microSD card. They can be activated by an application on your PC/Notebook.
integrated digital audio amplifier for the connection of a 8 Ohm loudspeaker.
Servos
connection of up a servo with the operation modes barrel recoil and steering.
max. 0,8 A current consumption for the servo.
Radio control
control with a common RC gear (radio and receiver, 40 MHz or 2.4 GHz) with at least two channels (acceleration and steering). Five channels are necessary for the control of all options.
Connection of up to six channels. One channel is reserved for user defined functions.
The receiver does not need an additional battery. 5V BEC are supplied.
IR battle functions
connection with an optionally available adapter to Tamiya® Battle Unit or ElMod® Battle Set.
simple configuration with three DIP-switches.
selectable vehicle type: light, medium, heavy.
battle type: infinite lives (vehicle returns to battle after being destroyed) or Hard Core (vehicle stays destroyed until it's switched off an on again).
General
large configuration possibilities on PC or Notebook with over 100 parameters. An USB cable is provided.
Parameterization, status information and control of all vehicle functions.
Individual vehicle profiles may be created and saved.
Operation with NiCd-, NiMh- or LiPo-Batteries with a voltage between 7.2 V and 10 V.
Under voltage shut down for protection against deep discharge. Overvoltage shut-down.
Overvoltage shut-down.
integrated 10 A mini fuse for the drive protection.
integrated, resettable SMD-fuse for the protection of the turret functions.
compact size: 92mm x 55mm(3,6"x2,2").
German
French
